|
|
#3 of 7 |  Prev -
Next 
 SINTECK 30
Description
The EX30 MiniStation is a complete FM Exciter/Transmitter. You can choose the frequency
through the buttons located on the equipment front panel. Frequencies between 87,5 to
108,1MHz can be set by the user in 100kHz steps. The equipment is totally BROADBAND, this
means, the RF power level stays the same independently of operation frequency.
The excellent audio quality is due to its hi-quality FM VCO, modulating through eight varicap
diodes.
The EX30 has variable power output from 0W to 30W, this is important if you drive an external
power amplifier (like Smart Series and PowerCell), this way, if your amplifier need about 25W to
input this FM exciter is the most indicated.
Suitable for applications like FM exciter, the EX30 can also be used as stand alone transmitter.
The EX30 MiniStation has a stereo generator built-in, only connecting the audio cable from the
mixer the FM station is on the air. Also, you can configurate if your transmittion will be in MONO
or STEREO mode - externally - just pressing the buttons on the front panel, and it’s done.
All MiniStation series have an optional card called “Single Band Audio Processor - APCard-1” you
can turn your MiniStation into even more powerful version. This card processes the audio from
the mixer in a limited/compressed audio level, avoiding distortions on the audio modulation.
Also, if you have an external audio processor, the EX30 MiniStation has an option in its panel:
you can configure the main audio input, if it is stereo generated internally to EX30 or externally,
from the processor. To do this, you just need to press the buttons UP/DOWN and SELECT.
RDS encoders may be connected in the EX30 MiniStation, there are 2 inputs for these encoders:
SCA input and 19KHz tone sync output.
The EX30 is available in American, European and also Japanese bands only pressing the overset
of the equipment.
On the LCD display, parameters like operation frequency, FWD and Reverse power, Composite
audio level, Left and Right audio level, selection of internal or external MPX, Stereo or Mono
operating and others are shown. We present an easy to use interface in this exciter, easy to
configure and operate.
The AC input is Full-Range (from 85 to 265V AC) “Switched Mode Power Supply” faciliting the
main connections around the world, 47 to 63Hz.
The EX30 is a complete solution, offering superior audio performance and quality. |
0 item 
